Tag Archives: openfiler ietd iscsi

For me, for later. For others?

How to change from blockio to fileio on a running openfiler instance with initiators connected and filesystems mounted:

[root@filer1 ~]# cat /proc/net/iet/volume
tid:1 name:iqn.2006-01.com.openfiler:tsn.ee0e2bfd7f91
lun:0 state:0 iotype:blockio iomode:wt path:/dev/mudkips/minun
[root@filer1 ~]# vi /etc/ietd.conf

edit the iotype to fileio in this file – but you're not done yet!

Also edit it here
[root@filer1 ~]# vi /opt/openfiler/etc/iscsi/targets/iscsi_settings.xml

This part sounds like it will kill xenserver. It won't. IO will hang for a second while the target is stopped.

[root@filer1 ~]# /etc/init.d/iscsi-target restart
Stopping iSCSI target service: …… [ OK ]
Starting iSCSI target service: [ OK ]
[root@filer1 ~]#

[root@filer1 ~]# cat /proc/net/iet/volume
tid:1 name:iqn.2006-01.com.openfiler:tsn.ee0e2bfd7f91
lun:0 state:0 iotype:fileio iomode:wt path:/dev/mudkips/minun
[root@filer1 ~]#

The internets say you can do:

[root@filer1 ~]# ietadm –op delete –tid=1 –lun=0 && ietadm –op new –tid=1 –lun=0 –params Type=fileio,Path=/dev/mudkips/minun

However, you can't delete a target that's got initiators connected. You CAN do this to a running copy of ietd/iscsi-target if this target has nobody connected without restarting ietd.

Now you know, and knowing is half the battle.

Remember, if you care about my more ephemeral stuff, I'm usually posting that to Facebook these days.
http://www.facebook.com/PaulTimmins